Ford Tuning - StrikeEngine Ford Tuning Search Engine

Enter one or more keywords to search for using the StrikeEngine Search Engine.
Note that '*' and '?' wildcards are supported.

131 results found.

7 pages of results.

1. Elise Performance

... ENGINE COMPONENTS ECU Module (click here for large view) Very early in the development of our range of tuning kits for the Lotus Elise, we realised the limitations of the standard Rover MEMS engine management electronic control unit (ecu). Our prototype 150 kit first ran with the Rover MEMS ecu, but it was never completely satisfactory; the throttle response was poor, and at many points in the rev range the fuelling was incorrect. However our desire to change the calibration of the ecu was thwarted, as Rover, ...

21 Jun 2003 - URL: http://www.raceline.co.uk/eliseecumodule.htm

2. Subaru Impreza ECU Dyno Graphs

Power Engineering UK - high performance tuning, specialists in Subaru, Mitsubishi and Ford, services include 2 and 4 wheel drive rolling roads, engine building, servicing, engine mapping, custom ECU programming and online parts shop.

... PHASE ONE ECU UPGRADE RESULTS The first graph shows the effectiveness of the Phase One ECU upgrade on a 1998 UK Impreza Turbo. The broken line shows the power and torque without the ECU upgrade, the solid line with the upgrade. The car gained over 40 lb / ft of torque through much of the mid-range, and around 30 bhp once the turbo had come into effect, and was mapped to use regular unleaded petrol (95 RON) at the request of the owner. The car was fitted with an aftermarket exhaust ...

26 Aug 2003 - URL: http://www.powerengineering.co.uk/acatalog/subaru_products_engine_ecudynograph.htm

3. Elise Performance

... tuned-length exhaust manifold and system (retaining the standard catalytic converter ), complete with silencer; a pair of high performance camshafts; modified high-flow air filter housing with high performance filter element; special 'Raceline ' branded cam cover insert; and a specially-developed electronic control unit (ecu, or 'black box) and ancillaries, which is unique to Raceline Cars, and allows the full potential of the engine to be unleashed. In developing these tuning packages, Raceline has been careful to maintain the Elise's essential virtues. They add no discernible weight; ...

21 Jun 2003 - URL: http://www.raceline.co.uk/elisetuningintro.htm

4. Power Engineering - Ford Tuning for your Escort RS Turbo, S1, S2, Cosworth or T25, or Sierra Cosworth 2WD or 4WD

... of products and services recently added to our range and to provide details of products currently under development. New Focus ST 2.5 Superchip We are pleased to announce the we have now completed our first Superchip conversion for the new Focus ST. The conversion is an actual ECU re-program as opposed to a chip change and we have to remove the ECU from the vehicle to bench program it. The ECU is programmed on a special jig via the processors BDM interface. The are no physical chip changes and no soldering involved. The figures that ...

4 Oct 2006 - URL: http://www.powerengineering.co.uk/acatalog/ford.htm

5. 2L I4 Duratec

... 2L I4 Duratec This Engine are by far the Best Engine that fords have Yet produced. All Alloy block & head & A std Hp of 144 Hp but with A pair of Throttle Bodys & Ecu a Std Engine will give 195 Hp. This Engine is Light weight & Idel for Rallying Sprints & Hill climes & Most of all the Kit car industry 195 Hp spec Brand new Std Engine, Throttle Body & Ecu kit & Dyno set up From 4170.00+vat 220 Hp Spec As Above but fitted with a pair of ...

14 Apr 2006 - URL: http://www.vulcanengines.com/2L_I4_duratec.htm

6. Engine and tuning Products for your Subaru Impreza, Turbo, WRX, STi or P1

... included in the price. Before and after dyno runs are also recorded to show the improvement. News: We are now able to carry out our Power Packs for the 2.5ltr versions of the Impreza. Please call for details. 1999 Model Year onwards EcuTek remapped ECU T75 back box K & N panel filter Price: Please call for details As part of this Power Pack, the car's engine management is remapped using the infamous EcuTek tuning tools, which results in impressive performance gains when combined with the included performance exhaust and K & ...

20 Nov 2006 - URL: http://www.powerengineering.co.uk/acatalog/subaru_products_engine.htm

7. Power Engineering UK, high performance tuning products and services for Subaru, Mitsubishi and Ford, including 2 and 4 wheel drive rolling roads

... and a huge range of tuning products. All our products can be shipped worldwide. LATEST NEWS Cannonball Run Europe The Cannonball Run Europe have just bought our Ford Focus as their promotional car for this year's Cannonball Run. Check out www.cannonballruneurope.co.uk for more information. Ecutek ECU Upgrades Using the latest Ecutek ECU tuning software we are now able to re-program all ECU's for the following vehicles: Subaru Impreza 99-00 UK turbo Subaru Impreza WRX+STi MY01-07 inc. 2.5 versions Mitsubishi Evo's V-IX PowerMaster Diesel Tuning Want to enhance the perfromance of your diesel ...

20 Nov 2006 - URL: http://www.powerengineering.co.uk/acatalog/home.htm

8. Power Engineering Company Information

... who demand the best. We have excellent facilities built up over this period and very experienced and knowledgeable staff. There is no other tuning company in the country that can offer both 2 and 4 wheel drive computer controlled rolling roads, full servicing facilities, custom ECU programming, emission and fuel monitoring. We have huge experience and knowledge of Japanese cars and have close links with a number of top Japanese tuning companies and technical centres. Whether you are purchasing a set of uprated brake pads or a major tuning conversion you can rest ...

14 Mar 2006 - URL: http://www.powerengineering.co.uk/acatalog/aboutus.htm

9. Engine Products and tuning for the Mitsubishi Evo IV, V, VI and VII

... MITSUBISHI PRODUCT FOCUS-ENGINE EcuTek ECU Tuning EVO Power Packs Air Filters-Blitz Induction Kit Air Filters-Blitz Panel Filter Silicone Hose Sets-Turbo Hoses Silicone Hose Sets-Coolant Hoses Tuning Accessories-Exhaust Manifold Heatshield Tuning Accessories-Bailey Dump Valve Tuning Accessories-High-Pressure Radiator Cap Tuning Accessories-Engine Bay Bolt Kit Tuning Accessories-Powerflex Engine Mount Kit Alloy Products-Water Header Tank Alloy Products-Power Steering Tank Alloy Products-WRC Group A Dump Valve Alloy Products-High-Flow Inlet Pipe Alloy Products-Fuse / Relay ...

14 Mar 2006 - URL: http://www.powerengineering.co.uk/acatalog/mitsubishi_products_engine.htm

10. Power Engineering - Subaru Tuning for your Impreza, Turbo, WRX, STi, 22B or P1

... therefore increasing boost until the valve opens again, etc, etc. This wastegate valve is controlled by a pneumatic actuator (although the Ford Focus World Rally Car has a hydraulic one) which itself is controlled by an electric solenoid valve which is controlled by the ECU which is controlled by the software which can be re-programmed by Power Engineering. Clever eh? So do you understand about turbochargers now? No, but please don't explain any more. OK. Exhaust Emissions Love 'em or hate 'em we all make 'em. When combustion ...

11 May 2005 - URL: http://www.powerengineering.co.uk/acatalog/subaru_tech.htm

11. Power Engineering - Mitsubishi Evolution (EVO) Tuning

11 May 2005 - URL: http://www.powerengineering.co.uk/acatalog/mitsubishi_tech.htm

12. Untitled Document

... need to convert a new or used Zetec engine to in-line installation. It includes; the famous Raceline wet sump kit; water rail, including thermostat housing, thermostat, and all fittings; inlet manifold; alternator mounting kit; 3D ignition electronic control unit (ecu) and wiring loom, including the throttle potentiometer; lightweight fully balanced flywheel, which positions the ring gear so the existing starter motor can be retained in most cases; and 8in clutch kit (see individual product descriptions for full details). Full fitting instructions are ...

21 Jun 2003 - URL: http://www.raceline.co.uk/zetec.htm

13. Untitled Document

... Weber nyloc nuts carburettor to manifold securing 0.12 Weber rubber cups 0.70 Weber cup washers 0.40 Weber choke 14.30 Weber main jet 3.20 Weber air corrector jet 1.85 Weber idle jet 2.50 Weber pump jet 3.85 Weber spill valve 3.35 Weber emulsion tube 11.25 Weber throttle potentiometer kit 36.60 ECU module (Ignition only) 350.00 Wiring loom to suit above ECU 95.00 All prices exclude VAT BACK ...

21 Jun 2003 - URL: http://www.raceline.co.uk/zeteccarbparts.htm

14. Elise Performance

... (ex VAT) RLK150 Camshaft Kit~~~420.00 Gasket Kit~~~10.00 Cylinder Head Gasket Set~70.00 Cam Cover Insert-Raceline~~~~ 29.00 Air Filter Element~~~~ 27.00 Modified Air Box~~~~ 127.00 ECU Module-Lotus Elise 'K ' Series~~~POA ECU Module-Mounting Bracket~~~50.00 7" Stainless Steel Exhaust Silencer Assembly~~~~ 350.00 Four Branch Primary Set-Stainless Steel~~~291.40 Four into One Exhaust Collector-Stainless ...

21 Jun 2003 - URL: http://www.raceline.co.uk/elise111senginekit.htm

15. Power Engineering - Mitsubishi Evolution (EVO) Tuning

... Tuning area. At Power Engineering we have all you require to maintain and improve your Evo: from a fully equipped workshop staffed by experienced car enthusiasts to a 750bhp four wheel drive rolling road. Being an Ecutek dealer we are able to carry out custom mapped ECU upgrades for the Evo V to IX based on our own mapping for UK fuels. This alone has taken 12 months of development and testing. In addition to the ECU upgrades we have developed our own high power exhaust system which incorporates a high-flow catalyst. We have ...

9 Mar 2006 - URL: http://www.powerengineering.co.uk/acatalog/mitsubishi.htm

16. Power Engineering - Subaru Tuning for your Impreza, Turbo, WRX, STi, 22B or P1

... to explain exactly what you want us to do. This allows us to book the correct amount of time to do the job properly. For instance if you book a power test (30 minutes) and then ask if we can carry out a Phase One ECU conversion (6 hours) it does make things difficult if we have 8 other cars booked in that day! If the car has a fault you want us to cure, please explain as clearly as possible the symptoms. Not what your friend told you it is ...

11 May 2005 - URL: http://www.powerengineering.co.uk/acatalog/subaru_advice.htm

17. Cosworth

Cosworth - Performance engineering solutions.

... approx 2500-3000) and continues well past redline. Ground from new chill cast billets and sold in matching sets of four. Intake Duration: 278 Degrees Intake Lift: 10.74mm Exhaust Duration: 274 Degrees Exhaust lift: 10.0mm. Improved valve train is highly recommended and ECU tuning will be required for maximum performance. Part number: KK3920 reliability-innovation-performance-excellence ...

16 Nov 2006 - URL: http://www.cosworth.com/news_detail.php?id=82

18. Cosworth

Cosworth - Performance engineering solutions.

... 2006 Mitsubishi EVO IX. These cams are engineered to function with the MIVEC cylinder head and are ground from new billets. Designed to increase power and torque, primary power gains will be noticed in the higher RPM range. Additionally, with improved valve train and ECU tuning, even greater power will be produced. Intake Duration: 272 degrees. Lift: 11mm Exhaust Duration: 272 degrees. Lift: 11mm Part number KK3921 Suggested retail $649.00pr. Our CNC Ported Big Valve Cylinder Head is also available for the Evolution IX. ...

16 Nov 2006 - URL: http://www.cosworth.com/news_detail.php?id=76

19. Mark Stanton - Ferriday Engineering

... regularly competes in the WSCC Speed Series held throughout the UK at various sprint, track and hillclimb circuits, together with club trackdays. Next year may see the engine with steel rods, forged pistons, a modified head & special cams. The throttle body & ECU system are supplied by SBD with this type of engine build in mind, and will require a simple re-map to produce big power. ...

16 Nov 2006 - URL: http://ferriday.co.uk/ferriday/stanton.shtml

20. Minister Power - Engine Mapping

... Minister-Power has purposely nurtured the subtle and sophisticated art of engine management mapping. Due to customers specific corporate policies, Minister-Power has experience with a range of ECU manufacturers, for example; EFI, MBE, Pectel, etc. Both road and competition applications have been necessary to adopt. Typical Ignition map Current SVA compliance has been achieved on many current engine specifications. The experience gained and the flexibility of our Dynamometer equipment can produce accurate and prompt information, aiding customers to achieve their targets in as short a time and most cost ...

7 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/mapping.htm

Result Pages: 1 2 3 4 5 6 7 Next >>

Ford Tuner Search