StrikeEngine - Links to engine builders in the UK and
USA. Engine building services for competition/race engines as well as
high performance road engines. Includes engine builders specialising in
Honda, Nissan, Ford, Vauxhall/Opel, Chevy as well as NASCAR, BTCC and
Club Racing.
Advanced Engine
Research
Established since 1997, AER are designers and builders of award winning
race engine solutions that are leading the way in the motor sports
industry.
Brunswick Automotive
At Brunswick Automotive we have been building race winning engines for
well over a decade, our workshop has a dedicated engine building area
where strict standards of cleanliness are observed at all time. We offer
in house gas flowing and cylinder head refacing and are able to supply
products from both Piper & Kent Cams, we can also supply, install and
map most popular engine management systems on the market today including
OMEX, Motec and EFI. At the same time we have definately not forgotten
the art of carburettor tuning and maintain a number of succesful
historic racing engines. As a result we are able to offer an engine
building service to meet the needs of all the various spheres of
motorsport whether the requirement is for an engine to last a 24 hour
race or simply to extract a little more power for enjoyable track day
use. In recent years we have had considerable experience with the
following engines, but are always prepared to take on a new challenge:
Alfa Romeo:
8V Boxer - 135bhp Production specification & "full race" 160bhp 1500cc
engine
16V Boxer - 155bhp Production specification & "full race" 240bhp 1800cc
engines on carbs or management.
24V V6 - 250bhp Production specification & 300bhp modified race engine
on Motec
"Nord" 2.0 - 160bhp race/trackday engine
2.0 Twinspark - 220bhp Endurance/24 Hour race engines, 250bhp "full
race" engine
BMW:
M12 - 185bhp race engine for "Youngtimer" Trophy 2002Ti
BMC:
"A" Series - Mini Se7en & Miglia race engines
"B" Series - BCV8 series and FIA Historic MGB engines
Ford:
CVH - Group 1 Touring car engine
Crossflow - Classic Clubmans race engine
351 "Windsor" V8 - 350bhp modified road engine
Peugeot:
1.9 GTi race engine
Mi16 race engine
306 S16 trackday engine
Rover:
V8 for BCV8 series MGB V8
"K" Series 240bhp "full race" engine for British GT Lotus Elise
Subaru:
EJ20 Sti engine for fast road/trackday Impreza
Connaught
Competition Engines
Established in February 1985, Newington based Connaught Competition
Engines has built up an enviable track record for it engines within
motorsport. Proprietor Phil Price graduated with an IMech Tech from a
tool making apprenticeship with the Ministry of Defence and worked for
six years with Minister Racing
Engines before setting up on his own.
Danielson
Engineering, Technologies, Magny Cours, France Danielson Engineering
specialises in researching, designing and manufacturing prototype
engines, from petrol four-stroke single cylinder engines or diesel
multi-cylinder engines for the car industry. It is able to design and
manufacture everything in-house and can create functional engines in
less than four months for reasonable prices. To date it has desiglled
more than 40 different types of engines with tests and development on
the test bench The company is structured to bring a total offer to
Industrialists who wish to realise, within a short time, technically
ambitious projects or prototype parts
Engine Developments
Engine Developments has been in the business of race engine design,
development and maintenance for over 20 years. The company has grown
from a small engineering firm to its current status as one of the
principal suppliers of race engine technology and support to the
motorsport industry.
Horsham Developments
Nissan engine building specialist focusing on the SR20DE and SR20DET
HT Racing
HT Racing who specialise in the building and tuning of the following 4
cylinder Ford engines;
BD series
Lotus twin cam
Zetec E
Pinto
X/Flow
CVH
RS2000 16v
Ilmor Engineering
Ilmor Inc’s founding as a race support company has provided us with a
culture that inherently understands all of the aspects of high
performance engines. Engines supported by Ilmor have won in excess of
160 Indy Car races including 12 Indy 500 wins and 9 Indy Car driver
championships.
Inspection Optics
Ltd, Frome,
Somerset , UK Rigid I flexible endoscopes,
cold li1. enabling internal inspection of engines, gearboxes, components
and framework Diameter from 1 Omm down to I mm diameter and Insertion
tube lengths up to three metres. Use by eye or attached to a colour
video camera I monitor, allowing group viewing and problem solving
Colour chip at the tip video endoscopes available with four way tip
articulation Oiameters of 6 and 8mm. Insertion tube lengths up to six
metres. Supplied complete with LCD screen, card capture and USB output
to computer. All systems lightweight and battery operable
John Wilcox Race Engines
Wilcox Race Engines specialise in engines and the design and
manufacturing of engine components, because of this we are able to
dedicate our facilities entirely to the building, testing and
development of high performance race engines.
Julian Godfrey TOMMY GRAHAM (IRELAND)
– 2009 Latest Spec Cosworth YB Rallycross Engine & Preparation Work for
New Fiesta. Irish & UK Rallycross Championship.
BRUNO RAMOS (PORTUGAL) – New WRC YB Cosworth Engine –
After Winning 2008 Championship. We now have Fully Converted Expofor’s
Group A Engine to High Compression WRC Spec.
GEORGE TRACEY (IRELAND) - Rebuilt Citreon Xsara –
Complete Rebuild of the Ex. Kenneth Hansen Xsara.
JOS KUYPERS (NETHERLANDS) - 2009 latest spec Cosworth
YB Rallycross Engine – Dutch & European Rallycross Championship.
DERMOT CARNEGIE (IRELAND) – Alfa Engine – Rebuilding of
an Alfa Guillietta Engine for Historic Rallying.
STEVE HIL (ENGLAND) – 2 New EVO 9 Engines – For his
Latest Spec EVO 9 New Car.
JULIAN GODFREY (ENGLAND) New Modified Fiesta – 1600cc
Duratec Engine for UK / Irish / European Rallycross Championships.
230Bhp & 10,000 RPM.
Mecachrome, France Mecachrome is a world leading
high precision engineering group with 30 years experience in supplying a
wide range of high performance powertrain solutions and individual
components. Its engine R&D centre and manufacturing plants enable
Mecachrome to offer from individual component optimisation studies up to
complete engine / gearbox designs and manufactures with the use of self
-developed innovative materials and coatings. Mecachrome's industrial
expertise in machining solutions contributes to proposing various race
winning chassis and engine components ballast uprights, cylinder heads.
blocks, pistons. crankshafts, valve train components. Mecachrome's
quality and performance in motor racing (F1, GP2, LMP1, Moto GP. NASCAR)
alongside It'S flexibility and industrial knowledge
Minister Power
It is Minister-Power's policy to
build the engines to a high standard, using quality engineering
practices, components and assembly operations, and after sales
assistance to suit the customer.
Mountune
Mountune Racing is renowned for the design, development and production
of championship-level competition engines. Since 1979 we have supplied
road, rally and track race engines to many of the world’s leading
motorsport teams, including Ford, Formula Palmer Audi, Ascari, Petronas/Proton,
Peugeot and Hyundai.
Nicolson
Mclaren Nicholson McLaren
rebuild, develop and sell Cosworth engines
Phil Jones Engine Developments We were founded 21 years ago and have been
serving the Motorsport industry ever since. Our Expertise is in Engines,
Gearboxes and Differentials.
Ric Wood Motorsport
Race Engines are what it's all about for us. We build race engines and
we race them. It's in our blood.
We have invested heavily in state of the art computer controlled
equipment and software to build the best possible engines for racing or
fast road applications.
The Sections below give you some insight in to our engineering philosphy
behind our engines and some of the great engines we have built.
If you are a serious racer, a track day or fast road enthusiast you'll
find plenty of interest here.
Call us for more details on any of our engine services.
Swindon Race Engines Swindon Racing Engines design, develop,
manufacture, assemble, and support race winning engines.
Zytek
As a major international specialist in
performance engines, Zytek offers standard, tailored and bespoke
solutions in a range of categories.
Road and Race Engines
Big Jim Racing
"People always telling you “that can′t be done”? Not here at Big Jim
Racing. Anyone caught saying that in our workshop would be out on their
ear!! That′s the ethos on which Big Jim Racing was founded and indeed on
which we thrive.
Big Jim racing has been involved in performance tuning for over 15
years. In that time we have been involved in just about every area, from
fast road to circuit race engines.
We specialise in performance conversions with an emphasis on engineering
based solutions. From a lightened flywheel to a supercharged, poppet
valved, 4 cylinder two-stroke, we have the enthusiasm and can-do
attitude to make ideas real. We also have the expertise to undertake
prototype and product development, being small enough to offer you a
personal level of service but with the experience to ensure your
requirements are fulfilled. "
Clifford
Cox Engineering
Here at Clifford Cox we are able to
build and rebuild most engines and cylinder heads either to standard
specification or modified to suit your budget.
Collins
Performance Engineering
Collins Performance Engineering have established a name for themselves
in the Ford world by being at the forefront of Ford Sierra Cosworth
tuning since the beginning back in 1987. Collins Performance offer a
full Engine Building service. With our engine Dyno facility and 4 wheel
drive rolling road we can tune an engine to perfection. Give us a call
now to discuss your ford tuning or other engine tuning requirements
Collins Performance Products
Our own brand of performance enhancing products currently including:
engine mounts, dump valves, boost gauges and wastegate actuators.
ECU Remapping
Collins produce the highly regarded \'Powerchip\' along with other
electronic upgrades (also known as chipping or ECU Remapping), setting
new standards in engine-efficiency and performance for petrol and diesel
engines.
Ford Focus ST & New RS mk2
If you own a Ford Focus ST or a new Focus RS mk2, check out our large
range of Ford Focus ST & RS tuning parts along with our selection of
Ford Focus ST & RS Performance Exhausts
DMC Engines
At DMC Engines, we specialise in rebuilding and modifying car engines
both for motorsport and for restoration projects.
DTM Power
We are able to undertake development projects to increase the torque and
power of any type of Race Engine, or high performance road engine, Ford
to Ferrari, Pinto to DFV.
Dunnell Engines
In buying a Dunnell Engine or component you can be assured of the
highest quality of workmanship which has resulted in the design and
production of world beating racing engines for both National and
International championships over a period of 35 years.
(Ford Zetec & Duratec)
HKS Europe
HKS offer a range of road car engines to meet any customer’s
requirements. These can be anything, from a simple rebuild and power
increase to 350bhp, to a comprehensive racing package producing in
excess for 600bhp.
Huddart Engines
For over 35 years, Huddart engines have been offering probably the best
and most complete service for the American engine owner.
Impulse
Developments
Company History: Impulse Developments have been trading for 20 years and
in that time have built up a reputation for the highest quality
machining and engine preperation in the NW . We deal with customers from
all over the UK.
Products & Services Offered:
Cylinder head specialists and engine building from standard engine to
competition , cylinder heads reconditioned to gas flowed heads for all
forms of motorsport.Dynamic engine balancing, supplier of all engine
parts from standard to competion parts ie steel cranks and con rods,
forged pistons,heavey duty bearings , hard to find parts etc
International Engine Services
IES designed the Nissan BTCC engine that was dominant in the class from
1997 to 2000, winning the manufacturers title in 1998 & 1999. Currently
they prepare the Nissan Touring Car engines for the European Touring Car
series on behalf of the factory.
JE Developments
We have specialised in building and developing Rover V8 engines for more
than 25 years.
JE Engineering
JE Engineering the World-leading creators of performance
enhancements for Land Rover Vehicles and Rover V8 Engines.
Prima Racing
We can re-build or modifying any Citroën engine to your
specific requirements
QED
Motorsport
QED Motorsport is a longstanding
supplier of outstanding, performance engines for clubman
level motorsport and beyond.
Our heritage is with the
Lotus-Ford Twincam,
which we have been working with for over 30 years, but over
time we have selectively added other engines to our stable.
Our first involvement with the Lotus 900 Series engines
(907, 911, and 912) followed our developments with the Lotus
Sunbeam for hillclimbing. We now offer a comprehensive range
of original Lotus and aftermarket parts.
Motorsport also brought us to the
Vauxhall/Opel XE
which at the time was GM's mainstay production engine and
has now become a familiar sight in many motorsport
applications.
It's successor the
Vauxhall/Opel Ecotec
is a very similar design and has similar potential.
Radco Engines
The business has been
established for 7 years and specialises in engine building,
performance tuning and modification of classic and historic
engines for both cars and motorcycles. There is a fully
equipped workshop with 95% of machining work carried out
in-house.
RIPS
You have come to the right place if you want a custom built
RB engine or top quality custom fabricated parts for your
Nissan RB powered road/race car.
In New Zealand, R.I.P.S currently have the fastest street
Skyline, fastest Japanese street car, fastest Pro Import on
petrol, the worlds fastest 240z and the worlds fastest RB30
Plus, the owner Robbie Ward holds more than three times as
many import drag records than any other driver in NZ.
R.I.P.S specialise in custom making things you can't buy
'off the shelf' and all of our products are made to an
extremely high standard.
R.I.P.S build RB series engines from mild to wild with the
RB30, 2WD or 4WD, being our specialty.
R.I.P.S ship all over the world and our policy is 'quality
and customer satisfaction come first'
SBD Motorsport
We specialise in designing and manufacturing of engine
components and management systems for the Vauxhall, Ford
Duratec & Suzuki hayabusa engines for motorsport use.
Scholar Engines Scholar Engines
were formed in September
1968 to produce modified
performance road,
race,
rally and various
competition engines.
Swindon Race Engines
Swindon
Racing Engines design, develop, manufacture, assemble, and
support race winning engines.
Engine Builders -
Cylinder Head Services
Standard Engines
Pegasus Engines and
Transmissions Pegasus Engines & Transmissions Ltd of
Colchester, Essex. Specialise in the supply &
fitting of reconditioned & second hand engines & gearboxes. Plus new &
Reconditioned Cylinder heads.
Classic Car Engine
Builders
Crosthwaite and Gardiner
Specialists in the Manufacture of Race Engines,
Gearboxes and Spare Parts for the Historic Race Car Industry
Geoff Richardson
We supply the very best Cosworth historic engines for every conceivable
application. We have an experienced, dedicated, conscientious team here
in Kimbolton ready to help, supply, support and advise you, and above
all get you winning!
Ed Pink Racing Engines
(Van Nuys, California)
Ed Pink Racing Engines (EPRE) is one of America's premier auto racing
engine building, testing design and development facilities
Fischer Engineering
Throughout our rich history, Fischer engines have won races, pole
positions and national championships in NASCAR Nextel Cup, NASCAR Grand
National and Elite Divisions, NASCAR Craftsman Truck Series, the ARCA
RE/MAX Series, ASA, IMSA GTO and SCCA Trans-Am.
Golden Eagle Manufacturing (San
Dimas, CA)
For Over 20 years, Golden Eagle Manufacturing has been exmplifying
standards in the machining industry. A commitment to quality and
detailed craftsmanship comes from every product that Golden Eagle
manufactures. From military hardware with military spec. tolerances in
aerospace or govenrment defense related uses, to our new passion for the
sport compact market, Golden Eagle Manufacturing has proven itself to be
a leader in anything it sets out to do.
SR20DE, SR20DET, SR20VE and SR20VET turbo specialist. Excellent website
listing a hug range of products both for the VE and DE motors. Part
including VE head DE block conversion kits for the S13 and S14 200SX
chassis. Valve springs and retainers for the VE, FWD 5 speed to 6 speed
gearbox conversion, intake manifold spacers for the S14/S15 to allow top
feed injectors, complete short blocks with standard capacity up to
2.34litres they even manufacture their own torque plate for accurate
cylinder boring of the SR20. They also offer race car and drift car
builds including space frame construction
Mazworx founded in 2004, has been on the cutting edge
of performance, product research and development, and fabrication. We
have dedicated our expertise over the years from racing and product
development to create the best performance parts on market. Although we
are known for our world's most powerful Nissan SR20 powerplants, our
performance product knowledge does not end there. From building full
chassis race cars, cnc machine product development, full engine building
capabilites, custom fabrication product development, we are your one
stop go-fast facility.
Be sure to check out our current projects section to see what endless
capabilities we have.
RAW Performance
If you are looking for Ron@Axis, you are in the right place. RAW
Performance, formerly Axis Power Tuning - same great products, just a
new name.
This is your one stop for Full Service Subaru Performance. We offer a
wide array of parts & services ranging from a clutch replacement to a
full engine & drive-train swaps.
Our specialty: Fully Built Subaru Race Engines. We have, over the years,
built countless engines for customers in every region of the world.
Engine Builders Japan
Tomei
The Grandmasters of SR20 Engines!
We have been building and tuning these engines since the day it was 1st
released from Nissan. So with nearly 2 decades of experience, you can
rest assured our complete Genesis engine is worth every bit of your
time.
Japanese Specialist
Comptech Our years of
race winning experience in all types of endurance and road racing has
made COMPTECH one of the premier road race engine specialist in the
country. We currently develop, build, and maintain engines for factory
teams such as Mazda, Acura and other top performing teams.
In 2007, COMPTECH engines powered Tri-point Mazda's 3 car team to the
World Cup Manufacturer's Championship as well as the over-all
championship.
StrikeEngine SEARCH ENGINE - Car Sites ONLY "Try it,
we are sure you will find what you are looking for and more!"
Collins
Performance Engineering
Collins
Performance Engineering
