Ford Tuning - StrikeEngine Ford Tuning Search Engine

Enter one or more keywords to search for using the StrikeEngine Search Engine.
Note that '*' and '?' wildcards are supported.

305 results found.

16 pages of results.

21. Subaru Impreza ECU Dyno Graphs

Power Engineering UK - high performance tuning, specialists in Subaru, Mitsubishi and Ford, services include 2 and 4 wheel drive rolling roads, engine building, servicing, engine mapping, custom ECU programming and online parts shop.

... lb / ft of torque through much of the mid-range, and around 30 bhp once the turbo had come into effect, and was mapped to use regular unleaded petrol (95 RON) at the request of the owner. The car was fitted with an aftermarket exhaust front pipe and rear box plus air filter during both dyno runs. The second graph shows the effectiveness of the Phase One ECU upgrade on a WRX STi IV. Again, the broken line shows the power and torque without the ECU upgrade, the solid line with ...

26 Aug 2003 - URL: http://www.powerengineering.co.uk/acatalog/subaru_products_engine_ecudynograph.htm

22. dir14

... Duty Pressure Plate 127.00 31 Decking P.O.A. 32 Carburettored Engines Only 33 Modified Weber Carburettor Kit 285.00 34 Modified Weber Carburettor Auto Choke 290.00 35 Air Filters 36 Price Depending On Application From 32.00 Unleaded Cylinder Head Conversion. For Standard and Stage 1 Only. All new exhaust valve seat inserts, all new bronze valve guide inserts. Exchange Standard Head: 315.00 Exchange Stage 1: 464.00 For 3.2 to 3.6 litre conversions see end of price list 37 Performance Exhaust Manifolds and Systems 38 Exhaust Manifolds Capri 159.50 39 Exhaust Systems Capri 338.00 40 Exhaust ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/dir14.html

23. SPECILAISED ENGINES LTD

... Heavy Duty Pressure Plate 134.00 31 Decking P.O.A. 32 Carburettored Engines Only 33 Modified Weber Carburettor Kit 286.00 34 Modified Weber Carburettor Auto Choke 286.00 35 Air Filters 36 Price Depending On Application From 32.00 For 3.2 to 3.6 litre conversions see end of price list 37 Performance Exhaust Manifolds and Systems 38 Exhaust Manifolds P.O.A 39 Exhaust Systems P.O.A. 40 Exhaust Manifolds P.O.A. 41 Exhaust Systems P.O.A. 42 Exhaust Manifolds P.O.A. 43 Exhaust Systems P.O.A. 44 Fitting-Dependant on Application 35 to 48.50 45 Performance Braking System 46 Performance Braking System Kit ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/dir15.html

24. Exhaust Products for your Subaru Impreza, Turbo, WRX, STi or P1

... SUBARU PRODUCT FOCUS-EXHAUSTS POWER T75 Exhaust Systems POWER T75 Twin-Dump Downpipe POWER T75 Centre Section POWER T75 Back Box POWER Equal Length Manifold Magnex Back Boxes Magnex Centre Pipe / Down Pipe / Up Pipe Blitz NUR-Spec CAT-back Exhaust System Blitz NUR-Spec Back Box Don't forget nearly all our products can be ordered online through our Online Shop! POWER T75 EXHAUST SYSTEMS We have seen every single exhaust available for the Impreza and armed with this knowledge we set out to develop the best system available anywhere. We needed a very high quality system with ...

11 May 2005 - URL: http://www.powerengineering.co.uk/acatalog/subaru_products_exhausts.htm

25. Cosworth

Cosworth - Performance engineering solutions.

... competitive at Monaco with Alex Wurz setting fastest time on Friday & Mark Webber taking second place on the grid (following Michael Schumachers penalty). Both Mark & Nico ran competitively in the race with Mark in contention for a podium finish. Unfortunately both cars suffered exhaust system failures & didnt complete the race." A thoroughly disappointing end to what was shaping up to be a promising event for Cosworth following Mark's exceptional qualifying position. Unfortunately both cars retired due to exhaust failures. We need to give both engines a thorough inspection back ...

16 Nov 2006 - URL: http://www.cosworth.com/news_detail.php?id=51

26. Cosworth Performance Parts RT 5-1-06.xls

... AVCS Type) Int" 278" deg. 10.7mm lift / Exh." 274" deg. 10.mm lift Subaru WRX EJ20 (2.0L) Set of four" 272" deg. 10mm lift Mitsubishi Evo 4G63 (2.0L) Pr (1 intake and 1 exhaust cam) M1 Grind" 264" deg. 10.2 mm lift Mitsubishi Evo 4G63 (2.0L) Pr (1 intake and 1 exhaust cam) M2 Grind" 272" deg. 11 mm lift (Turbo application) (Turbo application) Cosworth Forged Pistons Sug. ...

16 Nov 2006 - URL: http://www.cosworth.com/download.php?file=MTYwNzA2X2Nvc3dvcnRocHJlc3NyZWxlYXNlX2F0dGFjaG1lbnQucGRmI3VwbG9hZHMvMTE0Nzg5MDcyMy5wZGYjMzk5MDEjYXBwbGljYXRpb24vcGRm

27. Minister Power Duratec Engine Components

... ) 235-00 1 Performance clutch disc (organic) and clutch cover 180-50 1 Set Hi-load flywheel bolt set 45-00 1 Set forged pistons 525-00 1 Air filter including back plate 75-00 1 Aluminium bell-housing (suitable for hydraulic clutch) 295-00 1 Roller barrel manifold system 995-00 1 Exhaust system 4 into 1 including collector and silencer 985-00 1 Clutch slave cylinder 122-00 1 Aluminium oil filter adaptor 75-00 1 Dry sump tank 135-00 1 Lightweight Alternator 185-00 1 Alternator bracket 89-00 1 Alternator aluminium pulley – 60mm 6 row Polly V 36-60 1 Set Steel con rods 2.3 ...

7 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/merch_duratec_components.htm

28. Ferriday Engineering

... investment in new 3D CNC milling equipment with 50, 000rpm spindle speed that has allowed a new range of one-off products to become readily available, including a large range of custom made Solid Copper & Bi-Metal Head Gaskets, Decompression Plates, Thermal Inlet Gaskets & Thermal Exhaust Plates, Inlet & Exhaust Adaptor Plates and 3D CNC Machining to Combustion Chambers. News-We now produce a completely new type of 1.0mm thick bi-metal head gasket. Our library of gasket drawings is ever growing, but to create a gasket that isn't already on file ...

16 Nov 2006 - URL: http://ferriday.co.uk/

29. Cosworth

Cosworth - Performance engineering solutions.

... to dramatically increase power without sacrificing drivability. Power comes on in the lower rpm range (approx 2500-3000) and continues well past redline. Ground from new chill cast billets and sold in matching sets of four. Intake Duration: 278 Degrees Intake Lift: 10.74mm Exhaust Duration: 274 Degrees Exhaust lift: 10.0mm. Improved valve train is highly recommended and ECU tuning will be required for maximum performance. Part number: KK3920 reliability-innovation-performance-excellence ...

16 Nov 2006 - URL: http://www.cosworth.com/news_detail.php?id=82

30. On-Line Ordering - Manifold Adaptors - Ferriday Engineering

... Cosworth YB Ford Cosworth YB plenum spacer Aluminium spacer creates extra space around the trumpets by moving the inner plenum wall away from the bellmouth. 88.00 Ford CVH Efi Mfi / carb inlet manifold 93.00 Ford CVH Mfi / carb Efi inlet manifold 93.00 Ford Zetec Ford CVH exhaust manifold For Zetec turbo conversions, to mount a CVH turbo exhaust manifold onto a Zetec head 98.00 Ford Zetec Ford CVH Mfi / carb inlet manifold For Zetec turbo conversions, to mount a CVH inlet manifold onto a Zetec head. Please note, that although this works ...

16 Nov 2006 - URL: http://ferriday.co.uk/orders/manifold_adaptors.shtml

31. Minister Power Required Ancillaties Caterham Vauxhall Dry Sump

... & Disc Air Filters ECU With Small Loom Coil Assy With Small Module & HT Lead Sparkplug Leads and Cap Crankshaft Sensor Thermostat Housing Scavenge Oil Pump Belt With Engine Mount Fitted Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Starter Motor Alternator Exhaust Side Engine Mount Oil Pipes Bell Housing Carburettor Fuel Pipes It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. ...

10 Mar 2006 - URL: http://www.minister-power.com/support/ancillary_pages/cat_vaux_dry_ancillaries.htm

32. Engine Machining - Ferriday Engineering

... valve seat inserts 3 angle & custom valve seat profiles Bronze valve guide sleeves Accurate valve guide boring for thinwall guides Valve grinding, stem polishing & valve modifications Cam follower-bore machining (Ford Zetec to accept Vauxhall buckets etc) Chemical & bead-blast cleaning CNC custom-made inlet & exhaust manifold adaptor plates for alloy heads Special one-off CNC machined items such as Thermal Inlet Gaskets, Thermal Exhaust Plates, deck plates, groove machining to head gasket faces, o-ringed inlet flanges etc. For ultimate race cylinder heads we recommend Guy Croft Race Engines-01522 705222 ...

16 Nov 2006 - URL: http://ferriday.co.uk/machining/engine_machining.shtml

33. Rapid Prototyping

... on-screen image into a machining program, with tool paths, cutting speeds & feed rates calculated within a couple of minutes. This machine is used for accurate repeat machining of engine components and other 3D profiling jobs, as well as simple jobs like one-off inlet & exhaust manifold adaptor plates (and spacer plates if you're looking for that last bit of torque). Machining your logo into a rocker cover or other components can be completed quickly & easily." Brag" plates to fit into an existing recess can be made from basic ...

16 Nov 2006 - URL: http://ferriday.co.uk/cnc/prototyping.shtml

34. Production Items

... PRODUCTION ITEMS Once a prototype has been created, the computer file is held ready for the next one to be made. These are then available either from stock or within a couple of days. Current files include-Ford CVH copper exhaust manifold gasket, 24.00 X / Flow copper exhaust manifold gaskets, 14.00 set Zetec spark plug cover with your logo, 4mm thick from billet, includes bolts & spacers, from 35.00 YB Cosworth copper inlet manifold gasket, 19.00 (also available in 1mm soft alloy, 19.00) YB Cosworth ...

16 Nov 2006 - URL: http://ferriday.co.uk/cnc/production.shtml

35. Westfield Components

... ZETEC-R EXHAUST SYSTEM Zetec-R All Stainless steel 4-into1, Track day friendly noise levels, 7" Re-Packable and standard silencers with tuned lengh primary pipes meeting in firing order Complete exhaust systems from 625.00 ex VAT Silencers from 295.00 ex VAT ...

21 Jun 2003 - URL: http://www.raceline.co.uk/westfield.htm

36. Minister Power Required Ancillaties Caterham Vauxhall Wet Sump

... Wet Sump Ancillaries Required: Clutch Presure Plate & Disc Air Filters ECU With Small Loom Coil Assy With Small Module & HT Lead Sparkplug Leads and Cap Crankshaft Sensor Thermostat Housing Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Starter Motor Alternator Exhaust Side Engine Mount Oil Pipes Bell Housing Carburettor Fuel Pipes It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the quicker, and save the client added costs. ...

10 Mar 2006 - URL: http://www.minister-power.com/support/ancillary_pages/cat_vaux_wet_ancillaries.htm

37. Process & Risks - Ferriday Engineering

... THE PROCESS Cylinder head is stripped to a bare casting and checked for cracks and valve guide wear. Worn exhaust guides must be replaced at this point. Existing seat inserts are removed. A valve seat insert of suitable size is chosen and a counterbore is machined into the casting in place of the original seat. The counterbore is checked for size and depth. A high temperature polymer" sealant" is applied to the counterbore. Once cured by heat, this substance has a melting point of 1800 degrees Centigrade (3000 Fahrenheit ...

16 Nov 2006 - URL: http://ferriday.co.uk/unleaded/process.shtml

38. On-Line Ordering - Thermal Products - Ferriday Engineering

... ORDER ON-LINE Bi-Metal Head Gaskets Misc. Components Decompression Plates Manifold Adaptors Thermal Products Thermal Inlet Gaskets and Thermal Exhaust Plates-more information on these products can be seen here. Inlet gaskets are paper coated on both sides, exhaust plates can be silicone coated (foc) on the head side if required. Stud & nut kit is included in price. If multiple purchases are made, please email & ask for a revised postage cost-mike @ferriday.co.uk Most of these components are in stock for immediate shipping, but some are ...

16 Nov 2006 - URL: http://ferriday.co.uk/orders/thermal.shtml

39. dir13

... Keys 99.00 09 Steel timing Gears and Keys 154.00 10 Tuftriding Con Rods Tuftrided 46.00 Crankshaft Tuftrided 80.00 11 Gas Flowed Cylinder Heads 11a Stage 1 253.00 11b Stage 2 292.00 11c Stage 3 378.50 (* Unleaded Conversion-See Panel Below) 12 Decking P.O.A. 13 Performance Exhaust Systems and Manifolds 13a Exhausts: Scimitar 193.50 13b Exhausts: Capri 266.00 13c Exhausts: Granada 339.00 14 Gas Flowed Inlet Manifolds 57.00 15 Manual Choke Conversion Kit 53.50 16a 38 DGAS Weber Carburettor 246.50 16b 40 DF15 Carburettor 224.00 16c Triple Carburettors 1541.00 17 Steel Main Caps 257.50 ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/dir13.html

40. Vulcan Engines

... Page 31 Previous page / Next page / Index Part No Make Engine Valve Size Price Price inc Vat Description VE903 Ford Crossflow 41.3mm -1.625" 14.95 17.57 Oversize Inlet VE904 Ford Crossflow 35.0mm -1.380" 18.95 22.27 Oversize Exhaust VE905A Lotus Twin Cam 1558cc 40.5mm -1.625" 18.95 22.27 Oversize Inlet VE906 Lotus Twin Cam 1558cc 35.0mm -1.380" 13.25 15.57 Oversize Exhaust VE907A Ford Essex V6 46.5mm -1.820" 18.95 22.27 Oversize Inlet VE908 Ford Essex V6 44.4mm -1.750" 14.95 17.57 Group 1 Inlet VE909 Ford Essex V6 41.3mm -1.625" 14.95 11.69 Group 1 Exhaust ...

14 Apr 2006 - URL: http://www.vulcanengines.com/brocure_2005/page_31.htm

Result Pages: << Previous 1 2 3 4 5 6 7 8 9 10 11 12 Next >>

Ford Tuner Search