|
|
|
Ford Tuners Ford Tuning - Links to Specialist Ford Tuners in the UK offering performance upgrades, engine rebuilds and builds, repairs and servicing. See also: Manufacturers for Air Filters, Exhausts, Suspension Rolling Roads Track Day Organisers Performance Ford Insurance Brokers Engineering Services
|
|
|||
|---|---|---|---|---|---|
|
Are you a dealer or distributor of a manufacturer listed on StrikeEngine? |
|
StrikeEngine Searches
Ford Escort
Clutch
|
Ford Tuner Search
Enter one or more keywords to search for using the StrikeEngine Search Engine. Search results for: exhaust
305 results found.
16 pages of results.
... INSTALLATION COMPONENTS-select which components you wish to view-Engine Mounts-Water Hose Kit-4 into 1 Exhaust System-Engine Breather Kit------ ...
... INSTALLATION COMPONENTS-select which components you wish to view-Exhaust Systems ...
... have found to their cost, the handling at the limit left something to be desired at times. Raceline Cars Limited has developed a range of tuning packages for the Elise under the Performance Engineered banner, including 145, 150 and 160bhp engine upgrades; stainless steel exhaust systems; anti-roll bar; suspension kit; oil cooler kit; and a special 'quick ' steering pinion, designed to enhance performance without affecting any of the Elise's legendary virtues. Raceline already enjoys an enviable reputation, based primarily on its work in developing high performance variants ...
64. Vulcan Engines
... need to have your engine modified. Thos involves having hardened valve seats fitted and the cost varies according to what type of car you have" They were also failed to mention that depending on the type of engine you would also have to change the type of exhaust valve. Additives are very expensive and also very inconvenient. The cost on average is an extra 30 to 50p per gallon! Out of the existing range the AA and other organisations have approved only three. Also you cannot mix the type of additive you use. ...
65. Vulcan Engines
... Page 16-CONT Previous page / Next page / Index As used on our 185 / 195hp engines. Valve sizes are increased to Inlet 34mm and Exhaust 29mm. Assembled with valve springs to suit either our VZ001 or VZ002 camshafts. Price 795.00 934.12 Inc Vat*Please Note. We use the latest technology when cutting our three angle valve seats. So accurately are these seats cut that the valves do not require lapping. In fact lapping the valve reduces the efficiency of the sealing. All major manufacturers, BMW, Porsche ...
66. Cosworth
Cosworth - Performance engineering solutions.
... , Chief Engineer, Performance Engineering, Cosworth Cosworth has been involved in CART and Indy racing in America for almost 30 years and during that time has notched up some incredible successes, including no less than a dozen wins at the world famous Indy 500. Cosworth exhaust notes first sounded on the American CART scene in 1976 though, in the guise of the DFX V8 engine. Since that time, Cosworth-engined cars have won 151 CART or Indy races, at the hands of such racing greats as Rick Mears, Al Unser and Bobby ...
67. Vulcan Engines
... X-FLOW ENGINES Previous page / Next page / Index Where we list full engine installations, these are literally engines and ancillaries (all new) from the bellhousing forward. The only items not supplied are those peculiar to a particular car, such as throttle cable, exhaust manifold, or coil. Apart, therefore, from oil and water, the engines are ready to start. Bear in mind that, at first sight, this might look like an expensive option, but there are a lot of small items that will be tiresome ...
... a Caterham car) Coil and HT Lead Sparkplug Leads and Distributor Cap Flywheel Sensor Thermostat Housing Inlet Manifold Complete Alternator (If fitted) Dry Sump Pump and Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Water Hoses Exhaust System Starter Motor Oil Cooler Bell Housing Fuel Pipe Oil Pipes Except Sump to Pump Air Filter Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the ...
... Motor from 155-00 Water Rail-Caterham 78-00 Run in and Dynamometer tested for individual performance 355-00 Notes: 1. Bespoke engine specification can be arranged 2. Price and specification are subject to change 3. All figures achieved on Minister Racing Engines Dynamometer, using their exhaust etc. 4. Optional equipment will attract additional labour charge if fitted 5. Terms and conditions available upon request 6. All prices are subject to VAT at the current rate Home MG-Rover 240 Sport MG-Rover 230 Sport MG-Rover 205 Sport Other New Engines Click here to print ...
... Motor from 155-00 Water Rail-Caterham 78-00 Run in and Dynamometer tested for individual performance 355-00 Notes: 1. Bespoke engine specification can be arranged 2. Price and specification are subject to change 3. All figures achieved on Minister Racing Engines Dynamometer, using their exhaust etc. 4. Optional equipment will attract additional labour charge if fitted 5. Terms and conditions available upon request 6. All prices are subject to VAT at the current rate Home MG-Rover 240 Sport MG-Rover 230 Sport MG-Rover 205 Sport Other New Engines Click here to print ...
... Ford Fiesta 1.4 SE Ancillaries Required: Engine Loom (Attached to Engine Unit) Alternator Alternator Belt Clutch Inlet Manifold & Throttle Body Coil HT Leads Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! ECU Loom With Fuse Box Exhaust Including Manifold Mass Air Flow Meter Air Filter Water Hoses It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this ...
... Formula Ford 1600 Kent Ancillaries Required: Ignition Module Coil Ignition Loom Clutch Distributor & Cap HT Leads Sump to Pump Oil Hose Only Fuel Pump Inlet Manifold with Carburettor Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Starter Motor Bell Housing Oil Pipes Oil Cooler Air filter or any Fixings Throttle Linkage (Exept 'Horseshoe Bracket) It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save ...
... Caterham CSR260 (Cosworth) Ancillaries Required: Clutch Pressure Plate and Disc Coils ECU Water Outlet on back of head Alternator Alternator Belt Heat Exchanger Thermostat Housing Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Bell Housing Oil Pipes Air Filter Wiring Loom Starter Motor It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact ...
... Vauxhall) Ancillaries Required: Clutch Coil & HT Leads ECU Throttle Linkage Complete Timing Disc Sensor Inlet Manifold with Carburettors Starter Motor Dipstick Thermostat Housing Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Water Hoses Air Filters Fuel Pipes Exhaust System Alternator and Mountings Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by ...
... Ford Fiesta 1800 Zetec Ancillaries Required: ECU Coil HT Leads Thermostat Housing Injector Loom Clutch Inlet Manifold comlpete Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Fuel Pipes Coolant Hoses Starter Motor Exhaust Manifold Oil Cooler Pipes Engine Mountings It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info @minister-power.com ...
... Unit (if fitted) with" blipper" Coil and HT lead Spark Plug Leads Distributor cap (If fitted) Flywheel Sensor Thermostat Housing Alternator Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Metal Water Pipe Water Hoses Exhaust System Starter Motor Air Filter Oil Cooler Fuel Pipe Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print ...
... Formula Ford Zetec 1800 Ancillaries Required: ECU Coil HT Leads Thermostat Housing Injector Loom Clutch Oil Pump and Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Fuel Pipes Blue Pipe Starter Motor Exhaust Manifold Oil Pipes It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info @minister-power.com Tel: ...
... Ford 2000 Portugal Ancillaries Required: ECU Coil HT Leads Thermostat Housing Clutch Oil Pump and Belt Water pump, Pulleys and Belt Inlet Manifold complete Throttle Linkage Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Fuel Pipes Starter Motor Exhaust System Oil Pipes Water Pipes Air Filter It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us ...
... Ancillaries Required: Inlet Manifold Complete Clutch ECU Coil and HT lead Spark Plug Leads Distributor cap (If fitted) Flywheel Sensor Thermostat Housing Alternator Airbox Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Metal Water Pipe Water Hoses Exhaust System Starter Motor Air Filter Oil Cooler Fuel Pipe Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print ...
... ECU 5AS Unit (Immobilizer) with" blipper" Coil & HT Lead Sparkplug Leads & Distributor Cap Flywheel Sensor Thermostat Inlet Manifold Complete Dry Sump Pump & Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Water Hoses Exhaust System Starter Motor Oil Cooler Bell Housing Oil Pipes Except Sump to Pump Air Filter Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added ...
Result Pages: << Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Next >> Search took 0.016 seconds Unable to write to log file (./logs/searchwords.log). Check that you have specified the correct log filename in your Indexer settings and that you have the required file permissions set. |
|
|
About StrikeEngine
The majority of car
models in the USA and Europe are catered for by the companies listed on
StrikeEngine
this is a small sample of the cars that are covered. We hope you enjoy the site and if you have any queries about performance parts, body kits or car tuning in general please feel free to contact us and if your company offers services relevant to these pages you can submit your site using the online form.
|
