Ford Tuning - StrikeEngine Ford Tuning Search Engine

Enter one or more keywords to search for using the StrikeEngine Search Engine.
Note that '*' and '?' wildcards are supported.

367 results found.

19 pages of results.

21. Power Engineering - Ford Tuning for your Escort RS Turbo, S1, S2, Cosworth or T25, or Sierra Cosworth 2WD or 4WD

Power Engineering UK - high performance tuning, specialists in Subaru, Mitsubishi and Ford, services include 2 and 4 wheel drive rolling roads, engine building, servicing, engine mapping, custom ECU programming and online parts shop.

... . The unit is built using Genuine Ford or OE parts & includes a new sump pan & fuel injectors (Escort RS Turbo ), pistons, bearings, gaskets, oil pump, water pump, timing belt, timing belt tensioner, thermostat, oil, oil filter, antifreeze & spark plugs. There is an option of a Power engineering ported, big valve head fitted at the same time. The engine carries a 12 month, unlimited mileage warranty and when fitted by Power Engineering includes Full Rolling Road set up after running-in. ...

11 May 2005 - URL: http://www.powerengineering.co.uk/acatalog/ford_blueprint.htm

22. Minister Power - Superlight / C400 Frequent Questions

... 650KB C400 Engine Data Page Q1 How should I set the oil level in my dry sump oil tank? Q2 Why should a triple pass radiator be fitted? Q3 Why should a radiator fan be fitted? Q4 Why should there be cool air to the air filter? Q5 When fitting a new or rebuilt engine should the oil system be cleaned? Q6 How is the breather system connected? Q7 Does the oil level need to be checked more frequently if used on track? Q8 Does the oil / filter need to be changed ...

9 May 2006 - URL: http://www.minister-power.com/minister_power_pages/c400_race_frequent_questions.htm

23. Power Engineering AIR FILTERS

... K & N Panel Filter Airflow to your engine is one of the most critical areas affecting the performance of your vehicle and one of the easiest areas to upgrade. Original equipment air filters on new vehicles are generally very restrictive. This is due to their paper construction that actually limits engine breathing. That ' s why we recommend K & N, the leader in filter technology as proven by their heavy use in both on and off-road racing. Price: 26. 55 (31. 20 Including VAT at 17.5 ...

30 Dec 2005 - URL: http://www.powerengineering.co.uk/acatalog/F_7_AIR_FILTERS.html

24. Engine and tuning products for your Ford Escort RS Turbo, S1, S2, Cosworth or T25, Sierra Cosworth 2WD or 4WD, Focus and Fiesta RS Turbo

... FORD PRODUCT FOCUS-ENGINE Air Filters-K & N Panel Filter Air Filters-K & N 57i Induction Kit Silicone Hose Sets Tuning Accessories-Magnecor HT Lead Set Tuning Accessories-Bailey Dump Valve Tuning Accessories-NGK Spark Plugs Cosmetic Parts-Water Header Tank Cosmetic Parts-Power Steering Tank Cosmetic Parts-Oil Breather Tank Cosmetic Parts-Water Swirl Pot Cosmetic Parts-Tubo Heatshield Cosmetic Parts-Air Filter Heatshield Cosmetic Parts-Brake Fluid Reservoir Cosmetic Parts-Fuse / Relay Cover Cosmetic Parts-Wiper Motor Cover Cosmetic ...

14 Mar 2006 - URL: http://www.powerengineering.co.uk/acatalog/ford_products_engine.htm

25. Minister power - Bargain Items

... . 3, 500+Fitting kit (only 1 remaining !!) All items subject to VAT Back to top of page Rover K Series Engines / Parts New Std 1.8 Camshafts available-50-00 Per PairNew Std 1.8 Timing Belts-5-00 New Std 1.8 / 1.6 Oil Filter Assy 6-00 New Std 1.8 Crankshafts 250-00 New Std 1.8 Piston / Rod Assembly 50-00 New Std 1.8 Flywheels 25-00 New Std 1.8 Clutch Covers 25-00 Special Offer New Std 1.8 Clutch Discs 25-00 Special Offer All items subject to VAT Back to top of page Ford Zetec Engines / ...

1 Jan 2006 - URL: http://www.minister-power.com/minister_power_pages/bargain_items.htm

26. Minister Power - MG Rover Engine Components

... mounting bracket from 1195.00 16 Valve springs from 69.76 16 Valve spring caps from 17.60 1 Pair fast road camshafts 335.00 1 Lightweight flywheel from 212.77 1 Performance clutch disc and clutch cover from 260.00 1 Set Hi-load flywheel bolt set 37.50 1 Set forged pistons 464.00 1 Air filter assy. 75.00 1 Pair Vernier pulleys from 165.00 1 Roller barrel manifold system 860.00 1 Set Steel con rods 2.0 950.00 1 Set cylinder head / blockstuds 295.00 1 Wet sump pan assembly 220.00 1 Set heavy duty big end bearings 120.00 1 Starter motor from 155.00 1 Triple ...

7 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/merch_mg_rover_components.htm

27. Minister Power Ancillaries Llist Caterham MG Rove K Series Eng. Dry Sump

... Inlet Manifold Complete Alternator (If fitted) Dry Sump Pump and Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Water Hoses Exhaust System Starter Motor Oil Cooler Bell Housing Fuel Pipe Oil Pipes Except Sump to Pump Air Filter Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info ...

10 Mar 2006 - URL: http://www.minister-power.com/support/ancillary_pages/caterham_K%20dry_ancillaries.htm

28. Stag

... . Also all the necessary ancillaries and modifications as listed below. The complete fitted conversion, ready to drive away, includes the following: V6 3, 000 Engine, Flywheel, Back Plate, Modified Clutch Driven Plate, Pressure Plate, Release Bearing, Air Filter, Modified Weber Carburettor, Carburettor Block, Inlet Manifold, Water Pump, Petrol Pump, Distributor, Modified Engine Mount Brackets, Engine Mounts, Fan Assembly, Front Pulley, Modified Radiator, Modified Gearbox and Bellhousing, all necessary Nuts, Bolts, Hoses etc, ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/dir16.html

29. Minister Power Engine Data Cosworth Duratec Caterham C400

... rpm Oil Pressure 5000rpm 4.8 Bar / 70 psi Oil Pressure 8000rpm 4.1 Bar / 60 psi Maximum Torque at 6250 rpm Oil Temperature Maximum 100 C Rev Limiter set to 8200 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 5w / 50 Data Logging Parameters Oil Filter Number (Purolator) L1763 Minimum rpm to Start Logging 3000 rpm Coolant Temperature above 5000 rpm 75 C 5 C Track use Set Shift Light to 7900 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 1.36 Bar / 20 psi Oil Temp. ...

11 Mar 2006 - URL: http://www.minister-power.com/support/engine_data_pages/cat_c400_data_page.htm

30. Stag

... . Against this, any failure means a" normal" garage would not, unlike a normal points set-up, be able to fix it. So we advise you to retain the normal distributor parts and a screwdriver as a" get you home" device. Filter King A fuel pressure regulator which can be used on standard and tuned engines. Designed to save fuel by regulating the fuel feed pressure to the carburettor float chamber, thereby not allowing the level of the fuel in the float chamber to become higher than its optimum. ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/dir17.html

31. Mega-Torque Duratec

... Camshafts Steel Con Rods Forged Pistons Fuel Pressure Regulator High Performance Valve Springs Crankshaft keyed Pulley kit Optional Equipment: Double Scavenge Dry Sump System 665-00 Wet Sump system 395-00 Lightened Flywheel 235-00 Heavy Duty 8.5 inch" Clutch assy 180-50 Light weight Alternator 185-00 Alternator Bracket 89-00 Air Filter assembly 75-00 Starter Motor 155-00 Water Rail 199-50 Run in and Dynamometer tested for individual performance 355-00 Notes: 1. Bespoke engine specification can be arranged 2. Price and specification are subject to change 3. All figures achieved on Minister Racing Engines Dynamometer, using their exhaust ...

18 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/new_engs_mega-torque-duratec.htm

32. SuperTorque Duratec

18 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/new_engs_super-torque-duratec.htm

33. Hi-Torque Duratec

... Loom Roller Barrel Induction System High Lift Camshafts Fuel Pressure Regulator High Performance Valve Springs Pulley kit Optional Equipment: Double Scavenge Dry Sump System 665-00 Wet Sump system 395-00 Lightened Flywheel 235-00 Heavy Duty 8.5 inch" Clutch assy 180-50 Light weight Alternator 185-00 Alternator Bracket 89-00 Air Filter assembly 75-00 Starter Motor 155-00 Water Rail 199-50 Run in and Dynamometer tested for individual performance 355-00 Notes: 1. Bespoke engine specification can be arranged 2. Price and specification are subject to change 3. All figures achieved on Minister Racing Engines Dynamometer, using their exhaust ...

18 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/new_engs_hi-torque-duratec.htm

34. Two Litre Duratec Engine Range

... 3) Fuel Pressure Regulator High Performance Valve Springs Crankshaft Keyed (4) Pulley Kit Optional Equipment: Double Scavenge Dry Sump System 665-00 Wet Sump system 395-00 Lightened Flywheel 235-00 Heavy Duty 8.5 inch" Clutch assy. 155-00 Light weight Alternator 185-00 Alternator Bracket 89-00 Air Filter assembly 75-00 Starter Motor 155-00 Water Rail 199-50 Run in and Dynamometer tested for individual performance 355-00 See where your engine will be built click on Factory Tour !!! Download Duratec brochure in PDF format 253KB requires Adobe Acrobat Reader 220bhp Specifications: Maximum Power is 220 bhp @7 ...

18 Jan 2005 - URL: http://www.minister-power.com/minister_power_pages/new_engs_2litre_range_duratec.htm

35. gurantee

... , for you too see and decide for yourself if you require any 'extras ' such as clutch parts etc. The guarantee covers all new parts and labour supplied by us, including clutch parts, apart from expendable items such as, plugs, oil, and filter, whether we fit the engine or you do. Note: All our work is carried out by our mechanics trained in Ford Engines only. All engines are built to the highest quality, whether they are standard or modified. Each Piston, each ring is carefully ...

16 Nov 2006 - URL: http://www.specialisedengines.co.uk/gurantee/gurantee.html

36. Minister Power Required Ancillaries Duratec Dry Sump

... Mazda Duratec Dry Sump Ancillaries Required: Clutch Pressure Plate and Disc Coil ECU Spark Plug Leads Alternator Engine Wiring Loom Oil Pump and Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Bell Housing Oil Pipes Air Filter Oil Cooler Starter Motor It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail ...

10 Mar 2006 - URL: http://www.minister-power.com/support/ancillary_pages/duratec_dry_ancillaries.htm

37. Minister Power Required Ancillaries Caterham C400

... Cosworth) Ancillaries Required: Clutch Pressure Plate and Disc Coils ECU Water Outlet on back of head Alternator Alternator Belt Heat Exchanger Thermostat Housing Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Bell Housing Oil Pipes Air Filter Wiring Loom Starter Motor It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail ...

29 Nov 2005 - URL: http://www.minister-power.com/support/ancillary_pages/cat_c400_ancillaries.htm

38. Minister Power Required Ancillaries Duratec Wet Sump

... Ford / Mazda Duratec Wet Sump Ancillaries Required: Clutch Pressure Plate and Disc Coil ECU Spark Plug Leads Alternator Engine Wiring Loom Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Bell Housing Oil Pipes Air Filter Oil Cooler Starter Motor It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: ...

10 Mar 2006 - URL: http://www.minister-power.com/support/ancillary_pages/duratec_wet_ancillaries.htm

39. Engine Conversion Kits

... 160 SPORT characteristics are a better option than the standard VVC, (it shows on our Dyno and probably in the car) The conversion consists of gas flowing and porting cylinder head, high performance cams, Vernier pulleys, cold air box system, with performance filter. The 160 SPORT conversion boosts the performance from standard by approximately 30 BHP. Available for both Lotus Elise and Caterham Applications. When this conversion can be purchased in kit form, which includes a cylinder head. Current price from 2400+VAT Home New Engines Services ...

22 Jun 2005 - URL: http://www.minister-power.com/minister_power_pages/merch_engine-conversion-kits.htm

40. Contact Us - Ferriday Engineering

... just 2 miles from M6 J14, and can be contacted on the phone number below. Callers are always welcome, but are by appointment only. PHONE-01785 621710-( International callers dial+44 1785 621710) E-MAIL-mike @ferriday.co.uk Our spam filter is working overtime recently. We always reply to e-mails-but if you don't receive a reply within a couple of days please resend your letter, it's probably gone into the wrong folder. Skype-add mike @ferriday.co.uk to your Skype contact list & you will ...

16 Nov 2006 - URL: http://ferriday.co.uk/bits/contact.shtml

Result Pages: << Previous 1 2 3 4 5 6 7 8 9 10 11 12 Next >>

Ford Tuner Search