|
|
|
Ford Tuners Ford Tuning - Links to Specialist Ford Tuners in the UK offering performance upgrades, engine rebuilds and builds, repairs and servicing. See also: Manufacturers for Air Filters, Exhausts, Suspension Rolling Roads Track Day Organisers Performance Ford Insurance Brokers Engineering Services
|
|
|||
|---|---|---|---|---|---|
|
Are you a dealer or distributor of a manufacturer listed on StrikeEngine? |
|
StrikeEngine Searches
Ford Escort
Clutch
|
Ford Tuner Search
Enter one or more keywords to search for using the StrikeEngine Search Engine. Search results for: filter
367 results found.
19 pages of results.
... Bar / 70 psi Maximum Power at 7200 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5800 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7600 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 05W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 7400 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Coil HT Leads Thermostat Housing Clutch Oil Pump and Belt Water pump, Pulleys and Belt Inlet Manifold complete Throttle Linkage Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Fuel Pipes Starter Motor Exhaust System Oil Pipes Water Pipes Air Filter It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info @minister-power.com ...
... with" blipper" Coil and HT lead Spark Plug Leads Distributor cap (If fitted) Flywheel Sensor Thermostat Housing Alternator Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Metal Water Pipe Water Hoses Exhaust System Starter Motor Air Filter Oil Cooler Fuel Pipe Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by ...
... Cosworth) Ancillaries Required: Clutch Pressure Plate and Disc Coils ECU Water Outlet on back of head Alternator Alternator Belt Heat Exchanger Thermostat Housing Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Bell Housing Oil Pipes Air Filter Wiring Loom Starter Motor It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail ...
... rpm Oil Pressure 5000rpm 4.8 Bar / 70 psi Oil Pressure 7500rpm 4.1 Bar / 60 psi Maximum Torque at 6000 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7700 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 5w / 50 Data Logging Parameters Oil Filter Number (Purolator) L1763 Minimum rpm to Start Logging 3000 rpm Coolant Temperature above 5000 rpm 75 C 5 C Track 85 C 5 C Road Set Shift Light to 7400 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 1.36 Bar / 2 ...
... Coil Ignition Loom Clutch Distributor & Cap HT Leads Sump to Pump Oil Hose Only Fuel Pump Inlet Manifold with Carburettor Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Exhaust System Starter Motor Bell Housing Oil Pipes Oil Cooler Air filter or any Fixings Throttle Linkage (Exept 'Horseshoe Bracket) It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this ...
... Loom (Attached to Engine Unit) Alternator Alternator Belt Clutch Inlet Manifold & Throttle Body Coil HT Leads Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! ECU Loom With Fuse Box Exhaust Including Manifold Mass Air Flow Meter Air Filter Water Hoses It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info ...
... Maximum Power at 7300 rpm Oil Pressure Minimum 2 Bar / 30 psi Maximum Torque at 5900 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7500 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0 / W50 to 15w / 50 Data Logging Parameters Oil Filter Number (Ford) EFL 600 Minimum rpm to Start Logging 2000 rpm Coolant Temperature 75 C 5 C Set Shift Light to 7400 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2 Bar / 30 psi Oil Temp. Warning (Max) ...
... Bar / 70 psi Maximum Power at 6600 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5200 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7000 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 6800 rpm Antifreeze / Inhibitor content mimimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Maximum Power at 6900 rpm Oil Pressure Minimum 2 Bar / 30 psi Maximum Torque at 4800 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7200 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0 / W50 to 15w / 50 Data Logging Parameters Oil Filter Number (Ford) EFL 600 Minimum rpm to Start Logging 2000 rpm Coolant Temperature 75 C 5 C Set Shift Light to 7100 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2 Bar / 30 psi Oil Temp. Warning (Max) ...
... Maximum Power at 7100 rpm Oil Pressure Minimum 2 Bar / 30 psi Maximum Torque at 4900 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7300 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0 / W50 to 15w / 50 Data Logging Parameters Oil Filter Number (Ford) EFL 600 Minimum rpm to Start Logging 2000 rpm Coolant Temperature 75 C 5 C Set Shift Light to 7200 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2 Bar / 30 psi Oil Temp. Warning (Max) ...
... Maximum Power at 8500 rpm Oil Pressure Minimum @4000+rpm 4.0 Bar / 60 psi Maximum Torque at 7000 rpm Oil Temperature Maximum 100 C Rev Limiter set to 8600 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 05W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000 rpm Coolant Temperature 75 C 5 C Set Shift Light to 8400 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2.8 Bar / 40 psi Oil Temp. Warning (Max) ...
... Bar / 70 psi Maximum Power at 6600 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5200 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7000 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 6800 rpm Antifreeze / Inhibitor content mimimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Bar / 70 psi Maximum Power at 6600 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5200 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7000 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 6800 rpm Antifreeze / Inhibitor content mimimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Bar / 70 psi Maximum Power at 6600 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5200 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7000 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 0W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 6800 rpm Antifreeze / Inhibitor content mimimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Bar / 70 psi Maximum Power at 7200 rpm Oil Pressure Minimum 3.5 Bar / 50 psi Maximum Torque at 5800 rpm Oil Temperature Maximum 100 C Rev Limiter set to 7600 rpm Oil Temperature Minimum 50 C Oil Grade / Viscosity 05W50 to 15W50 Data Logging Parameters Oil Filter Number (Unipart) GFE 280 Minimum rpm to Start Logging 2000rpm Coolant Temperature 75 C 5 C Set Shift Light to 7400 rpm Antifreeze / Inhibitor content minimum 50 %Set Low Oil Pressure Warning to 2.0 Bar / 30 psi Fuel Pressure Oil Temp. Warning (Max ...
... Leads & Distributor Cap Flywheel Sensor Thermostat Inlet Manifold Complete Dry Sump Pump & Belt Ancillaries Not Required: Please remove all of these ancillaries, to avoid any extra costs! Water Hoses Exhaust System Starter Motor Oil Cooler Bell Housing Oil Pipes Except Sump to Pump Air Filter Wiring Loom It would be appreciated if coolant and oil outlets are capped, and the engine is sent in a clean condition. This will expedite the work, and save the client added costs. Click here to print this page Contact us by: e-mail: info ...
... Lightened Flywheel-Caterham from 220-00 Lightened Flywheel and Ring Gear-Lotus 195-00 Heavy Duty Clutch assy (Cover and plate)-Caterham 150-00 Heavy Duty Clutch assy (Cover and plate)-Lotus from 260-00 Light weight Alternator from 186-00 Alternator Bracket from 18-50 Air Filter assembly 75-00 Starter Motor from 155-00 Water Rail-Caterham 78-00 Run in and Dynamometer tested for individual performance 355-00 Notes: 1. Bespoke engine specification can be arranged 2. Price and specification are subject to change 3. All figures achieved on Minister Racing Engines Dynamometer, ...
... standard water radiator, taking advantage of the existing radiator ducting, and is cleverly mounted in such a way that the airflow through the oil cooler does not spoil airflow through the radiator. At the other end, a conventional sandwich block is used at the oil filter housing to route oil through the oil cooler circuit. The sandwich block contains a thermostat, so oil flows to and through the cooler only when required. The hoses run inside the door sill on the right-hand side of the vehicle, as they do with Lotus's own ...
... RACELINE COMPONENTS Carburettor Parts Weber carburettors 40 and 45DCOE 245.00 Weber trumpet (ram pipe) 40DCOE 16.00 Weber trumpet (ram pipe) 45DCOE 16.00 K & N air filter Caterham style 37.50 Weber underslung throttle linkage single cable 55.00 Weber DCOE to inlet manifold mounting studs 1.00 Weber misab plates carburettor to manifold 6.20 Weber nyloc nuts carburettor to manifold securing 0.12 Weber rubber cups 0.70 Weber cup washers 0.40 Weber choke 14.30 Weber main jet 3.20 Weber air corrector jet 1.85 Weber idle jet 2.50 Weber pump jet 3.85 Weber spill valve 3.35 Weber emulsion tube ...
Result Pages: << Previous 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Next >> Search took 0.009 seconds Unable to write to log file (./logs/searchwords.log). Check that you have specified the correct log filename in your Indexer settings and that you have the required file permissions set. |
|
|
About StrikeEngine
The majority of car
models in the USA and Europe are catered for by the companies listed on
StrikeEngine
this is a small sample of the cars that are covered. We hope you enjoy the site and if you have any queries about performance parts, body kits or car tuning in general please feel free to contact us and if your company offers services relevant to these pages you can submit your site using the online form.
|
